Frigidaire Range Repair, Across Southern California

Most common cause is a corroded or wet spark electrode at the burner base. Spilled food and liquid can short the spark path; the electrode keeps clicking but no spark jumps to the burner. Diagnostic order: (1) clean and dry the electrode, about 35% of 'clicks but no light' calls resolve here at no parts cost; (2) confirm gas supply at the unit (check that other burners light); (3) failed ignition switch under the knob, replacement $145-$245; (4) clogged orifice or blocked burner cap; (5) gas valve failure (least common, most expensive). We work the cheap items first. If multiple burners are failing simultaneously, the diagnostic shifts toward the spark module rather than individual igniters.

Three things usually cause uneven oven heat on Frigidaire electric models (FFEF / FFEC series). (1) Failed bake or broil element, visible damage (cracks, blistering, or a broken loop) shows on inspection. Bake element $185-$285; broil element similar. (2) Oven temperature sensor drift, the resistance value changes over time and the control board reads incorrect temperature. Replacement $145-$215, takes 20 minutes. (3) Convection fan motor failure on convection-equipped models, leaving the oven heating but not circulating. We always test oven calibration after element or sensor replacement to confirm temperature is reading correctly across the bake range.

Diagnostic is $89, applied toward the repair when you approve work. Common Frigidaire range repair ranges: surface igniter (gas) $145-$215; ignition switch / spark module $145-$285; gas valve $280-$440; bake / broil element (electric) $185-$285; oven temperature sensor $145-$215; convection fan motor $245-$385; surface coil element (electric coil-top) $145-$245; radiant element (glass-top electric) $185-$285; Gallery induction zone coil $345-$525; main control board $345-$525. Frigidaire Gallery uplift typically 10-15% above base; Professional uplift 20-30%. We give a written estimate before any work begins.

When a Frigidaire gas burner clicks but won't light, our techs at Same Day Appliance Repair start with the spark electrode at the burner base — it's commonly fouled by spilled food or wet from cleaning, and about 35% of these calls resolve at the cleaning step with no parts cost. If the electrode is clean and dry, we check the ignition switch ($145–$245), a clogged orifice, and the gas valve. When several burners fail to spark at once, the spark module is usually the cause. $89 residential diagnostic, waived with repair.

A Frigidaire oven that runs hot, cold, or won't reach temperature usually comes down to two parts. On electric models a cracked or blistered bake/broil element ($185–$285) is the common cause, often with visible damage on inspection. If the element is intact, a drifted oven temperature sensor ($145–$215) makes the control board read the wrong temperature — a quick 20-minute fix common at year 6-9. Our techs at Same Day Appliance Repair run a calibration test after any heat repair to confirm the oven reads true. $89 residential diagnostic, waived with repair.

Our technicians work independently of Frigidaire's factory service network - we're often faster and available same-day in Southern California.