Wood Stone Gas Pizza Oven Repair
Wood Stone Gas Pizza Oven Repair
Gas-fired Wood Stone pizza oven won't light or hold heat? Same-day repair of Wood Stone gas models across LA and SoCal. Gas models only. $120 diagnostic, waived with repair.
AI Diagnostic · free · about a minute
Not sure what's wrong?
Describe it in your own words — get the likely causes and a repair cost range before you book.
Our Branches
10 service territories across Southern California
Where we work
Local branches across Southern California
Ten branches covering Los Angeles, Orange, Ventura, Santa Barbara, San Bernardino, and Riverside counties. Same-day visits when a technician is available.
Los Angeles
Brentwood, Bel Air, Pacific Palisades, Santa Monica, Westwood, Century City, Culver City, Westside, Long Beach
Wood Stone gas-fired pizza ovens, Bellingham WA since 1989
A gas-fired Wood Stone pizza oven that won't light, won't hold temperature, or cooks unevenly usually traces to one of three patterns our techs at Same Day Appliance Repair diagnose first. (1) The burner ignitor or flame sensor wears out, and the oven fails to light or drops out mid-service. (2) The thermocouple or gas safety valve fails, so gas is cut even though the burner looks fine. (3) Thermostat or control drift, so the oven reads correct but bakes hotter or cooler than set. $120 commercial diagnostic, waived with repair.
We service the gas-fired Wood Stone models only. We don't work on wood-fired ovens.
Wood Stone Corporation manufactures commercial pizza ovens in Bellingham, Washington, and has operated as an independent company since 1989. Many of its oven lines are built in gas-fired configurations, and those are the units we repair: burner, gas valve, thermocouple, ignition, thermostat, controls, door seal, and, on rotating-deck units, the deck drive.
Wood Stone gas pizza ovens we service
Mountain series (Mt Adams), gas-fired
Wood Stone's stone-hearth deck ovens in gas-fired configuration. Service: burner and ignitor, thermocouple, gas safety valve, regulator, thermostat and controls, door seal.
Fire Deck, gas
Gas-fired Fire Deck deck ovens in various sizes. Same gas-side service pattern: ignition, burner, gas valve, thermocouple, temperature control.
Stratos, gas rotating deck
Rotating-deck pizza oven for high-volume operations. Service adds the deck drive motor and rotation controls to the standard gas burner, valve, and ignition work.
What fails on a gas Wood Stone oven
- Ignition, the burner ignitor or flame sensor wears from repeated high-temperature cycling; the oven clicks but won't light, or lights and drops out.
- Thermocouple and gas safety valve, a weak thermocouple closes the safety valve and shuts the gas off; a sticking valve starves the burner.
- Burner and orifice, a partially clogged orifice or burner port gives a lazy, uneven flame and slow recovery between bakes.
- Thermostat and controls, drift makes the hearth run hotter or cooler than the setting; electronic controls on newer units can fail outright.
- Regulator pressure, under-pressure runs cold, over-pressure burns out components; we check it on every gas call.
- Door seal and rotating-deck drive, door gaskets wear from constant use, and Stratos drive motors wear on high-volume units.
What Wood Stone gas pizza oven repair costs in LA
$120 flat commercial diagnostic, waived with repair. 90-day warranty on parts and labor.
| Repair | Typical range (parts + labor) |
|---|---|
| Thermostat replacement | $200–$340 |
| Oven thermocouple | $220–$380 |
| Door gasket / seal | $220–$380 |
| Burner ignitor assembly | $240–$400 |
| Gas valve | $280–$480 |
| Stratos rotating-deck drive motor | $450–$780 |
| Control board | $700–$1,200 |
Final price depends on model and parts. See our commercial oven repair cost guide.
Related Wood Stone and pizza oven pages
Wood Stone pizza oven repair, frequently asked
Do you repair Wood Stone pizza ovens?
Yes, the gas-fired Wood Stone models. We service the gas side: burner, ignitor, gas safety valve, thermocouple, regulator, thermostat, controls, door seal, and the rotating-deck drive on Stratos units. We don't work on wood-fired ovens.
Who makes Wood Stone pizza ovens?
Wood Stone Corporation, headquartered and manufacturing in Bellingham, Washington, and operating as an independent company since 1989. Many of its commercial oven lines are offered in gas-fired configurations, and those are the units we repair.
Why won't my Wood Stone gas oven light?
The usual causes are a worn burner ignitor or flame sensor, a weak thermocouple that keeps the gas safety valve closed, or low gas pressure at the regulator. We test each in order before replacing parts. Burner ignitor service typically runs $240 to $400 and a gas valve $280 to $480.
Why is my Wood Stone gas oven heating unevenly or running cool?
On a gas Wood Stone oven, uneven or low heat usually comes from a partially clogged burner orifice, thermostat drift, or regulator pressure that's off spec. We check flame pattern and gas pressure at operating temperature and verify the thermostat against an independent reading before quoting. Thermostat replacement typically runs $200 to $340.
What does Wood Stone gas pizza oven repair cost in LA?
$120 flat commercial diagnostic, waived with repair. Typical ranges: thermostat $200–$340, oven thermocouple $220–$380, door gasket / seal $220–$380, burner ignitor $240–$400, gas valve $280–$480, Stratos rotating-deck drive motor $450–$780, control board $700–$1,200. Repairs carry a 90-day warranty on parts and labor. See our commercial oven repair cost guide.
Do you work on wood-fired Wood Stone ovens?
No. We don't work on wood-fired ovens. If your Wood Stone oven runs on gas, we can repair it.
Wood Stone gas oven down? Call now.
Same-day emergency response across Los Angeles, Orange, Ventura, Santa Barbara, San Bernardino, Riverside, and San Diego counties. $120 commercial diagnostic, waived with repair. 90-day warranty on parts and labor.